1991 Toyota Starlet P8 Tuning JDM Corolla Carin...

Outrageous offers and pointless requests are ignored.

Only 3,500 parts were invested in the vehicle.

Sell my fully built Toyota Starlet P8 1.3 XLI

The vehicle has almost new TÜV and everything necessary is registered. All original parts are available and can be installed again. (bench seat, belts, spare wheel, end silencer, steering wheel, on-board tools, etc.) There are plenty of spare parts. 4x original steel rims with top all-weather tires and original Corolla e8/9 hubcaps.

Ideal track tool, show vehicle or normal daily in everyday life, everything is covered.

700-750Kg unladen weight

The vehicle has a mileage of only 114000Tkm everything detectable. All documents from 199X to today including all construction bills are available.

Original purchase agreement incl. Polaroid image from the Toyota car dealership from back then are available. A whole folder full of documents!

The vehicle is 2nd hand. Unfortunately, the vehicle had a small frontal damage. Then I restored everything. A test report for restoring the condition of the vehicle is available. There are no problems with insurance.

Activities performed/wear parts Engine compartment cleaned -New cylinder head gasket with everything that goes with it. Head planned valves ground in valves set. -All seals new -New head screws - refrigerant new Oil+ Filter -Tooth belts V-belts Sparkling candles Distribution cap Coolers Alternator OEM Denso Miscellaneous clamps and screws shock absorber -Schweller sealed with Raptor U-Pol

Otherwise, the vehicle has wear traces such as dents and scratches, 2 spots on the paint with light rust bubbles, does not fail after 35 years. No rust on the underbody. The sills were preserved and painted with Raptor Upol. The sills had no rust and are unwelded. I just sealed them as a precautionary measure.

Activities performed/Tunig parts

Cylinder head processed (planned, valves cleaned/ground) Dbilas Sport-Nockenwelle Street -8mm silicone tuning ignition cable Large Oil Filter (Toyota Supra) Oil filter cooler Valve cover overtaken silicone vacuum hoses silicone radiator hoses -Adjustable fuel pressure regulator + hose kit Manufactured fuelrail adapter for fuel regulators -Room manifold (Corolla E9) -Manufactured downpipe double-flow -Reworked air filter housing Aluminum compensation container coolant -Taiko Domstrebe engine compartment Aluminum battery holder -STW Sport springs 40mm -Stab + coupling rods + holders Starlet P9 -Manufactured M-TEC Brakes sports brake discs Loch+Schlitz -Intra special rims 6x14 + steel lugnuts (repainted) -Nankang NS-2 Semislicks -Heckspoiler original GT Turbo -GT Turbo front cooler mask incl. Headlamps -GTI front lip incl. manufactured holder Cold-Air-Intake front apron incl. Funnels and hose -Towing loops Manufactured sports muffler -Rally dirt catcher -Facelift seats driver + passenger -Sparco 2 H-belt -350mm sports steering wheel + hub (incl. expert opinion) -Manufactured long switching lower rod -K-Tune Shortshifter -Manufactured aluminum switching cover -AFR/Lambda display incl. Broadband Lambda for Downpipe Oil temperature incl. Sandwich planted/adapter/sensor oil fifter outlet -Cusco Domstebe trunk ...

The vehicle now has about 95-100PS. Diagram of the input measurement without manifold and camshaft is included. (84PS) I will make a new current diagram from the dynamometer.

Without camshaft more power in the lower speed range. With camshaft at the top.

The complete setup is documented photo and video. All invoices are available. Incl. 2x key

Part of the setup can be seen on Instagram AT supra.kev in the highlight "Starlet P8".

Because private purchase no guarantee or warranty.