1967 Citroën Citroen 2 CV Typ AZ 16 PS (AZAM)

############# Update 09/2026

I decided to let the LiMa go over. I'm waiting for an offer.

As soon as I have more information, I'll post it here. #############

After long thought, I now offer my 2CV type AZ with 16 hp, in the color Gris Dandy. I had acquired them in 2012 and always very much liked to drive. She was dry in a garage in summer. The bottom is stainless, was treated with fluid film and permafilm. The rims were irradiated and powder coated. The stainless steel wheel caps are credible from the GS. Very good compression see photos. The Robri - Alu wing corners are not screwed, I don't like holes in the sheet. They are only glued (with butyl round cord) and can be removed without residue. The headlight reflectors were rechrome. The yellow headlamp lamps are registered. Who wants to get the upper side blinker in orange.

The original French number plates are still available. The German sheet metal plates have been holding magnets for years.

in cre 2022 there was a new clutch, new motor bearing, and a new exhaust, just before the 123 electronic ignition, a new intake pin and a new carburetor matching it.

At the end of last year, the charging control lamp started to flicker. So fix new coals worried, 14 days ago installed with new battery, now it starts and also runs, only now unfortunately does not leave the charge control light anymore. :-(

It's still enough to drive at the garage, but I wouldn't want to drive to the TÜV, who knows if I got there.

So she'd be picking up with a hanger.

The TÜV has always woken them through without problems. Up to two funny little things: - Your duck drips. Where? On the spring pots. It's not bad, it can be licked. Is castor oil for the cork and rubber seals, state of the art in the 60's - Yeah. The duck is slanted because of this, the pig throwers also light slightly obliquely. I opened the driver's door and set myself in. Is it better now?

Unfortunately, I now lack the time and repentance to find out what is with the charge control lamp, the new coals, the controller, the LiMa, have read something from demagnetization... I don't know. The new owner likes to take care of it.

Of course, in the years in France, it has received one or the other rempler, the VR fender is probably new (to be seen on the hole inside for the suction hose, which was only available in the succession model).

Photo from the trunk I can still ship, there is also a top spare wheel. The wooden wedge, the car lifter and the crank are also available. There is an empty French wine box with it.

Just ask questions.

* The product names, manufacturer names and logos mentioned here, are property of the respective manufacturer or brand owner. Their name is only the product description.

I sell only used goods, unless otherwise described. These goods are from my private property and I do not pursue commercial purposes with my sales. There is no invoice for it.

Since private sellers also have to afford one year if they do not exclude it, I hereby declare expressly, that I do not take warranty/guarantee and no withdrawal for my private sales or exchange products. With the purchase / exchange / delivery of a bid you expressly agree to to completely dispense with the warranty/guarantee for used goods according to new EU law. *